Protective Wax
PROTWAX-TRANSPARENT-400ML
Register now and access our wide range of products
Can also be used overhead
360° valve
Heat-resistant
Heat-resistant up to +160 °C
Reliable
- Self-restoring properties
- Adhesive
- Water-repellent
Transparent
Protected area remains visible
Protective film has self-restoring properties
Low odour
The material temperature should be +10 °C to +30 °C. Ventilate cavities well after application. Turn the aerosol can upside down after use and spray until the valve is empty. Not suitable for use on visible painted surfaces
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
For preserving internal parts. Particularly on seams, joints and surfaces in the engine compartment and luggage compartment, on doors, sill panel trims, brake lines etc.
Can also be used as anti-corrosion agent for machines, machine parts and equipment when storing outdoors
Shake the can well before use. The surface must be dry and free from rust, dirt and grease. The optimum spraying distance is 30 cm. The best spraying results are achieved at a processing temperature of +15 °C to 25 °C.
Contents | 400 ml |
Colour | Transparent |
Min./max. skin-formation time | 90-120 min |
Conditions for skin-formation time | at 20°C |
Design | 360 ° valve |
Min. temperature resistance | -25 °C |
Max. temperature resistance | 160 °C |
Min. spraying distance | 30 cm |
Min. processing temperature | 15 °C |
Max. processing temperature | 25 °C |
Density | 0.665 g/cm³ |
Density conditions | at 20°C |