Hot air blower HLG 2300-E POWER
Hot air blower HLG 2300-E POWER
HOTAIRBLW-EL-(HLG2300-E POWER)
MASTER
Register now and access our wide range of products
- Frequently used settings can be saved using the LCD display
- The temperature is set in 5°C steps and the air flow is adjusted in 5 stages, thus allowing simple temperature and air flow control
- Long motor service life of up to 1000 hours
- Rugged ceramic heater with low impact sensitivity
- Thanks to the lightweight, ergonomic design, even longer work can be carried out with little fatigue
Datasheets(X)
Soldering and welding, plastic welding, gluing, removing paints, heating and forming plastic; welding bitumen; strong bead welding, sealing holes with welding additive, removing labels, keder welding, overlapping welding, removing adhesive, lens tinting (cleaning, drying, applying film), heat-shrink tubing, heat-shrink fabric, film wrapping
Nominal voltage | 230 V/AC |
Frequency | 50 Hz |
Power input | 2300 W |
Min./max. blower temperature | 80 to 650 °C |
Min./max. air current | 200-550 l/min |
Weight of machine | 750 g |
Cable length | 5 m |
Cable type | H05RN-F2x1.0 mm² |
Height | 195 mm |
Length | 250 mm |
Width | 75 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!